Measure the rooms affected by smoke, soot or firefighting, including rooms beyond the point of ignition. Select the severity and metro to see a planning range for cleaning, odor treatment and removal. Ask the estimator to price contents, reconstruction and any independent testing separately before you compare bids.
RestoreRadar’s November 10, 2026 planning model starts at $6.50–$14.00 per affected square foot. Multiply each end by the damage factor and metro factor shown in the controls, then apply the minimums of $1,500 and $2,500. “Not sure” spans the lowest through highest damage factors.
The metro selector shows the exact multiplier used for each city. RestoreRadar supplied these scenario factors for 15 metros. Elsewhere we apply the unadjusted base rate (1.00×). The rates, minimums and multipliers are planning assumptions. We have no local contractor bid sample or restoration price index validating them.
National published cost context
Angi reports $3,083–$52,031 for U.S. projects (checked 2026-08-10).
This is not the model result above. Published project costs describe broader scopes and do not establish RestoreRadar’s square-foot rates or metro factors.
Compare fire damage scenarios
Examples with a square footage use RestoreRadar’s planning model at the base metro factor (1.00×). The affected areas are illustrative. The national project figures from Angi provide context. See the model rates and minimums for the calculation.
Example scopes and planning ranges
Situation
Assumed scope
Planning range
What to ask about
Localized kitchen smoke and soot
150 sq ft · 1× damage factor
$1,500 – $2,500
Assumes light surface cleaning. Ask whether appliances and cabinet contents need separate treatment.
Multi-room smoke and odor
400 sq ft · 1.65× damage factor
$4,290 – $9,240
Assumes heavy odor across affected rooms. Confirm which surfaces and contents the crew will clean.
Structural fire rebuild
Outside the area model
Site-specific bid
Obtain a reconstruction bid after structural assessment. The estimator covers cleanup and preparation only.
How Much Does Smoke Damage Restoration Cost?
Angi reports $200–$1,200 per room for smoke damage restoration. For a kitchen flare-up, ask whether the room price includes cabinets, adjoining surfaces and odor treatment. Confirm which of those tasks are already in the cleaning line of your written estimate.
For whole fire-restoration projects, Angi reported a national range of $3,083–$52,031. That figure covers projects of different sizes and scopes. National fire restoration cost data · Updated 2026-08-01 · Checked 2026-08-10.
Questions for a Written Estimate
Contents: ask whether packing, transport, storage, cleaning, and return are included or quoted separately.
Water and rebuilding: ask whether drying firefighting water, removing damaged materials, and reconstruction are part of this estimate.
Changes: request a written description of exclusions and how additional work will be priced and approved.
Use the result to organize a phased fire-loss estimate. First confirm that the responsible authority has cleared access. Ask bidders to separate board-up or roof protection, firefighting-water extraction and drying, soot and residue cleaning, contents handling, odor treatment, demolition, and reconstruction. Record what will be cleaned, removed, stored, or rebuilt, what completion evidence applies to each phase, and who approves a change in scope. Structural, electrical, gas, engineering, and permit work may need separate qualified trades or inspections. Photograph safely accessible damage before cleanup or disposal and ask the insurer what emergency protection and documentation it authorizes. Have the contractor document heat damage, residue, structural stability and code-required repairs in the written scope.
Do not re-enter until the fire department or other responsible authority says the structure is safe. Ask the insurer what evidence must be preserved, photograph accessible damage from a safe location before cleanup or disposal, and confirm what temporary protection it authorizes. Board-up, firefighting-water removal, contents handling, residue cleaning, and reconstruction can be separate decisions; emergency access does not prove the whole property is ready for repair.
A proposed scope may include temporary protection, firefighting-water removal, material-specific soot and residue cleaning, contents work, odor treatment, and reconstruction. Ask which conditions were observed, which items are being cleaned or removed, what success or completion criteria apply, and who approves changes. Structural, electrical, gas, engineering, and other regulated work may require separate licensed trades, permits, or inspections; a general restoration credential is not a substitute for those requirements.
Your contact details may be shared with up to three companies listed for the selected area. See which companies may receive your request. Sponsored or claimed companies may be contacted first. Paid placement never changes rankings or listing facts.
Questions
How does the calculator estimate fire damage restoration cost?
It starts at $6.50–$14.00 per affected square foot and multiplies each end by the severity and metro factors. It then applies minimum job amounts of $1,500 at the low end and $2,500 at the high end.
Does the fire range include rebuilding?
The calculator excludes reconstruction, contents cleaning or replacement, permits and independent testing. Request those items as separate lines if the inspection finds they are needed.
Which rooms count toward the affected area?
Include rooms where surfaces need soot cleaning, smoke odor treatment or removal after firefighting. Smoke can travel beyond the room where the fire started. Ask the estimator to list the affected rooms and measure each floor area once.
Does using the calculator cost anything or commit me to hiring?
The estimate is free. You can compare companies directly or request a callback in a supported metro.